Deze info will ik nog delen:
Latency een groot probleem, ook omdat het dropouts veroorzaakt door buffer underuns.
ik heb waarschijnlijk na jaren zoeken de oorsprong van dpc latency problemen gevonden.
de tool latencymon is echt een aanrader.
http://www.resplendence.com/latencymon
hierin kun je op de driver nauwkeurig dpc en isr tijden monitoren.
"[FONT=Segoe UI, Arial]
[FONT=Segoe UI, Arial]because ISRs and DPCs run at elevated IRQL which means they cannot become preempted by the thread dispatcher (scheduler). Therefore to guarantee responsiveness of the system, ISR and DPC routines should execute as fast as possible."[/FONT][/FONT]
ik had eerst last van dropouts en crashes.
heb met een voltmeter gechecked op voltage drops.
andere psu getest.
sound card in een ander slot.
andere soundcard. andere gpu.
irq priority anders ingesteld. mainboard door gigabyte laten testen. alle devices in het bios uit.
alle beschikbare bios versies getest.
meerdere nvidia drivers getest. gpu uit gezet. maar steeds hetzelfde probleem.
en dan vandaag gebruik ik driversweeper (chrashed mijn systeem)
installeer ik de laatste nvidia driver.
haal phsychx eruit en de hdmi audio eruit. flash het bios en installeer de motu drivers. max dpc 400 pico sec. geen dropout na 3 uur testen. p45 ud3lr mobo met core 2 quad gtx 460. win 7 met hpet enabled. Ook heb ik in devicemanger een(hdaudio) devices disabled. (als system device)
ik weet niet waarom het nu wel werkt maar de tool latency tool liet duidelijk zien dat het om de nvidia drivers ging.
nu is er net een nieuwe driver versie uit waar je gemakkelijk de hd audio drivers eruit kan halen.
heb je dus dpc problemen check met dpc latencymon.
Configure interrupt request (IRQ) priorities in Windows 7
Question
How can i prioritize the IRQ which translate to Konnekt / Impact Twin / PowerCore to improve performance?
Answer
Below are basic registry editing tips that you can use to set IRQ priorities in Windows 7:
- Start by opening the System Information utility (msinfo32.exe), and navigating to System Summary\Hardware Resources\IRQs to view the IRQs in use on your system, and the devices using them.
- Open the Registry Editor and navigate to
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PriorityControl
- Create a new DWORD value in this key, and call it IRQ#Priority, where # is the IRQ of the device you wish to prioritize
- Double-click the new value, and enter a number for its priority. Enter 1 for top priority, 2 for second, and so on. Make sure not to enter the same priority number for two entries, and keep it simple by experimenting with only one or two values at first.
- Close the Registry Editor and reboot your computer when you’re done.